Vantageo 11DD-EL

Vantageo 11DD-EL

Vantageo 11dd el

Key Features

Mini 1U Chassis, Op􀆟mized for Intel Atom Platorms

2 00W Low Noise Power Supply

1 x 3.5" Internal Drive Bay

OR 2x 2.5" Internal Drive Bay (Optional)

OR 1x Full-height, Half-length PCI Expansion Slot (Optional)

OR 1x 2.5" Internal Drive & 1x FH, HL PCI (optional)

Power Switch, Reset Bu􀆩on & 5 LED Indicators

1. Intel® Xeon® processor D-1518, Single socket FCBGA 1667; 4-Core, 8 Threads, 35W

2. Up to 128GB ECC RDIMM DDR4 2133MHz or 64GB ECC/non-ECC UDIMM in 4 sockets

3. 2 PCI-E 3.0 x8, Mini PCI-E (mSATA support), M.2 PCI-E 3.0 x4 (SATA support), M Key 2242/2280/22110

4. 2 10G SFP+ and 2 GbE LAN

5. 4 SATA3 (6Gbps) ports via SoC

6. 2 USB 3.0 ports (rear), 5 USB 2.0 ports (4 via headers, 1 Type A)

7. 2 SuperDOM, 1 COM, TPM 2.0 header, GPIO and SMbus headers

8. 12V DC Input and ATX Power Source


Physical Stats

Form Factor

Mini 1U Chassis


9.0" x 7.25" (22.86cm x 18.42cm)

Processor / Cache


Intel® Xeon® Processor D-1518

Single Socket FCBGA1667 supported, CPU TDP support 35W

Cores / Cache

4 cores, 8 threads / 6MB cache

System Memory

Memory Capacity

Up to 128GB Registered ECC RDIMM, DDR4-2133MHz

Or 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots

Memory Type

2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM

DIMM Sizes

4GB, 8GB, 16GB, 32GB

Memory Voltage


Error Detection

Corrects single-bit errors • Detects double-bit errors (using ECC memory)

Expansion Slots

PCI - Express

2 PCI-E 3.0 x8

M.2 PCI-E 3.0x4, M Key 2242/2280/22110, Support SATA devices, Interface: PCI-E 2.0 x1, Mini-PCI-E with mSATA support • Intel® Xeon® Processor D-1518


1 M.2 M-Key SATA/PCI-E 3.0 x4, 2242/2280/22110

On-Board Devices


System on Chip


SoC controller for 4 SATA3 (6 Gbps) ports; RAID 0,1,5,10 • RSTe


Aspeed AST2400 BMC

Network Controllers

Dual LAN with 10G SFP+ from D- 1500 SoC Dual LAN with 1GbE with Intel® I210


Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over- LAN support

Input / Output


4 SATA3 (6Gbps) port Serial


1 RJ45 Dedicated IPMI LAN port • 2 1GbE LAN ports
2 10G SFP+ LAN ports


5 USB 2.0 ports (4 headers, 1 Type A)

2 USB 3.0 ports (2 rear)

Serial Port / Header

1 COM Port (1 header)


1 VGA port


TPM Header

System BIOS


128Mb SPI Flash with AMI BIOS

BIOS Features

• PCI 3.0

• USB Keyboard support

RTC (Real Time Clock) Wakeup

•UEFI 2.4

ACPI 5.0

Hardware BIOS Virus protection


Operating Environment

Operating Temperature Range

0°C ~ 60°C (32°F ~ 140°F)

Non-Operating Temperature Range

(-)40°C - 85°C (-40°F - 185°F)

Operating Relative Humidity Range

10% ~ 85% (non-condensing)

Non-Operating Relative Humidity Range

10% ~ 95% (non-condensing)



Intel® Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog

Power Configurations

ACPI Power Management

(+)12V DC Power Input

CPU thermal trip support for processor protection

ATX Power connector

Control of power-on for recovery from AC power loss

M.2 NGFF connector, Node Manager Support, SDDC, System level control, UID, WOL Voltage

PC Health Monitoring


(+)1.8V, +12V, +3.3V, +5V, 1.2V (VDIMM), 6 -fan status, Chassis intrusion header, HT, Memory, Memory Voltages, Supports system management utility, System level control, System temperature, VBAT


6x 4-pin fan headers (up to 6 fans), 4 fans with tachometer monitoring, Dual Cooling Zone, Fan speed control, Low
noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed
control, Status monitoring for on/off control, Status monitoring for speed control, System level control, Thermal
control tachometer fan connectors


Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI


CPU / System Overheat LED

Other Features

12V DC or ATX Power Source, 8-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, Hyper-Speed Technology hardware acceleration, M.2 NGFF connector, Node Manager Support, RoHS, SDDC, System level control, UID, WOL

Disclaimer : Technical data is subject to modification and delivery subject to availability. Any liability that the data and illustrations are complete, actual or correct is excluded. Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner.

Our Contact

It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout.

Phone : +91 8898889999