loader

Vantageo 22HH-H

Vantageo 22HH-H

Key Features

•2U chassis supports for maximum motherboard sizes - 13.68" x 13", E-ATX 12" x 13", ATX 12" x 10" motherboards

•8 x 3.5" hot-swap SAS3/SATA drive bay, 2 x 3.5" fixed drive bay

•8-port 2U SAS3 12Gbps TQ backplane, support up to 8x 3.5-inch SAS3/SATA3 HDD/SSD

•1U 800W Redundant Power Supply 76mm width, W/PMbus, Titanium

•7 low-profile expansion slot(s)

•3 x 80mm Hot-swap PWM Fans

1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4†/ v3 family; UPI up to 9.6GT/s

2. Intel® C612 chipset

3. Up to 1TB† ECC 3DS LRDIMM , up to DDR4- 2400†MHz ; 8 DIMM slots

4. 3 PCI-E 3.0 x8, 1 PCI-E 3.0 x4 (in x8), 1 PCI-E 3.0 x16, 1 PCI-E 2.0 x4 (in x8)

5. Intel® i210 GbE LAN, 2 ports

6. Integrated IPMI 2.0 and KVM with Dedicated LAN

7. 10 SATA3 (6Gbps); RAID 0, 1, 5, 10

8. 4 USB 3.0 (2 rear, 2 via header) 5 USB 2.0 (2 rear, 2 via header, 1 Type A)

SPECIFICATIONS

Physical Stats

Form Factor

2U Rackmountable

Dimensions

12" x 10" (30.48cm x 25.4cm)

Processor / Cache

CPU

• Intel® Xeon® processor E5-2600 v3, Intel® Xeon® processor E5-2600 v4

• Dual Socket LGA-2011-3 (Socket R3) supported, CPU TDP support Up to 145W TDP, 1 QPI up to 9.6 GT/s

Cores / Cache

• Up to 22 cores † / Up to 55MB† cache

Note

† BIOS version 2.0 or above is required

** Motherboard supports this maximum TDP. Please verify your system can thermally support.

System Memory

Memory Capacity

• 512GB Registered ECC RDIMM, DDR4-2400MHzUp to 1TB 3DS ECC LRDIMM, in 8 DIMM Slots

Memory Type

• 2400□/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit

DIMM Sizes

• RDIMM: 4GB, 8GB, 16GB, 32GB, 64GB

• LRDIMM: 32GB, 64GB

• 3DS LRDIMM: 128GB

Memory Voltage

1.2V

Error Detection

Corrects single-bit errors

PCI - Express

• 3 PCI-E 3.0 x8

• 1 PCI-E 3.0 x4 (in x8 slot)

• 1 PCI-E 3.0 x16,

• 1 PCI-E 2.0 x4 (in x8 slot)

On-Board Devices

Chipset

Intel® C612 chipset

SATA

Intel® C612 controller for 10 SATA3 (6 Gbps) ports; RAID

0,1,5,10

ACHI SATA

SATA3 (6Gbps); RAID 0, 1, 5, 10

SCU SATA

SATA3 (6Gbps); RAID 0, 1, 5, 10

Network Controllers

Single LAN with Supports 10Base-T, 100BASE TX, and 1000BASE-T, RJ45 output

Single LAN with Realtek RTL8211E PHY (dedicated IPMI)

Graphics

Dual LAN with Intel® i210 Gigabit Ethernet Controller

Aspeed AST2400 BMC

IPMI

• Support for Intelligent Platform Management Interface v.2.0

• ASPEED AST2400 BMC

• IPMI 2.0 with virtual media over LAN and KVM-overLAN support

Input / Output

SATA

10 SATA3 (6Gbps) ports

LAN

• 2 RJ45 Gigabit Ethernet LAN ports

• 1 RJ45 Dedicated IPMI LAN port

USB

• 5 USB 2.0 ports (2 rear + 2 via headers + 1 Type A)

• 4 USB 3.0 ports (2 rear + 2 via headers)

Serial Port / Header

• 2 COM Ports (1 rear, 1 header)

. 2 fast UART 16550 serial

VGA

• 1 VGA port

TPM

M TPM Header

Management

Software

• Intel® Node Manager, IPMI2.0, SuperDoctor® 5, Watchdog

Power Configurations

• ACPI Power Management

• Power-on mode for AC power recovery

System BIOS

BIOS Type

128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features

• Plug and Play (PnP)

• ACPI 3.0 / 4.0

• USB Keyboard support

• PCI 2.3

• SMBIOS 2.7.1

• UEFI 2.3.1

Operating Environment

Operating Temperature Range

10°C - 35°C (50°F - 95°F)

Non-Operating Temperature Range

(-)40°C - 70°C (-40°F - 158°F)

Operating Relative Humidity Range

8% - 90% (non-condensing)

Non-Operating Relative Humidity Range

5% - 95% (non-condensing)

PC Health Monitoring

Voltage

• 12V, +3.3V, +5V, +5V standby, 5 Phase-switching voltage regulator, Memory Voltages

FAN

• 8x 4-pin fan headers (up to 8 fans), 8x fans with tachometer monitoring, Pulse Width Modulated (PWM) fan connectors, Status monitoring for speed contro

Temperature

• Monitoring for CPU and chassisenvironment, CPU thermal trip support, Thermal Control for 8 Fan Connectors, Thermal Monitor 2 (TM2) support, PECI

LED

• CPU / System Overheat LED, Suspend static indicator LED, UID/Remote UID

Other Features

• Chassis intrusion detection, Chassis intrusion header, Dual Cooling Zones

Disclaimer : Technical data is subject to modification and delivery subject to availability. Any liability that the data
and illustrations are complete, actual or correct is excluded. Designations may be trademarks and/or copyrights of
the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such
owner.

Phone

Sales | (+91) 8898889999
​ Service | (+91) 7079343434

Email

Sales | goldi.bajaj@teqsys.in
​ Service | support@teqsys.in